Extrusion - Fields of application for WITTE gear pumps

Highest precision for the best quality

Gear pumps for extrusion

The extrusion process is very diverse. In the extrusion of plastics a wide variety of profiles and tubes can be produced. It is also possible to produce monolayer or multilayer films by means of extruders. In coextrusion, various materials are made into a film using multiple extruders. Besides the classical polymers, e.g. Polypropylene or polycarbonate are also used in extruding filled polymers. In Wood Plastics Composites (WPC) wood parts are bound in a polymer matrix.
In the food industry extrusion technology is also used. For extrusion of foodstuffs very high demands on the purity. The production of licorice should be mentioned here as an example.

Steady pressure

Due to the design, extruders do not ensure a very constant pressure at the outlet. Also, the efficiency of increasing the pressure in an extruder is not very good. Therefore, a gear pump is used after the extruder. On the one hand, the pump takes over the pressure build-up and thus relieves the extruder. On the other hand, the gear pump ensures even pressure and reduces the pulsations. The extrusion tools are optimally supplied with the melt.

Survey on advantages

  • Pulsation-free transport of the melt

  • Constant pressure circumstances

  • Low heat input

  • Increase of product quality

  • Pressure Relief of the extruder

Use of melt pumps

Classic applications where melt pumps are used:

  • Processes where transportation must be without pulsation

  • Processes where screen changers are used

  • In the granulation

  • In connection with filters

  • For compounding processes

  • With the processing of thermoplasts, elastomers and highly-filled plastics

  • In rubber extrusion process

To the melt pump program

Construction of WITTE melt pump

 

 

Melt Pumps are used in plastics extrusion process for increasing process pressure and reducing heat input. Mounted át the extruder outlet melt pumps guarantee a constant flow rate.

The extrusion industry segment contains a lot of different applications melt pumps can be used for. Espsecially for process with single screw extruder melt pumps are used for buildig up needed process pressure for screen changers or downstream die.

Plastic extrusion melt pumps ensure consistent product quality and avoid excessive rejects.




Contact form

Do you need further information?

Data Protection Declaration.

If you send us inquiries by means of our contact form, your personal data will be stored on the legal basis of Art. 6(1)f DSGVO (General Data Protection Regulation). Further accessories can be found in our Data Protection Declaration.