Homogenizer, Type DLM/H

Emulsifying, dispersing and shearing

INDAG homogenizer type DLM/H is used for effective mixing, emulsifying, dispersing and aerating of fluids, solids. Shear rate of DLM/H is very high.

A small selection of examples for applications are: continuous production of stable emulsion of oil + water + emulsifier; dilution of Natriumlaurylethersulfat (SELS) + water. DLM/H homogenizers are used in production of colour, varnish, detergent, adhesive. INDAG DLM/H homogenizer for continuous process reduces process time and increases product quality compared to a batch mixing system.

Technology of DLM/H

INDAG homogenizer type DLM/H consists of a rotor and stator equipped with axial positioned mixing/shearing elements. Mixing energy is introduced efficiently into product. It is possible (as an option) to heat or cool stator. INDAG mixer DLM/H is designed in a modular way. DLM/H is offered in a compact design (KB) and a foundation plate design (LB). Compact design means that rotor is supported by drive shaft of motor. Foundation plate design means that rotor is supported by its own bearing block. An own bearing block allows smaller clearance between rotor and stator mixing elements and therefore even more intensive shearing effect. Homogenizer DLM/H with own bearing block can be equipped with every commercially available motor. DLM/H can be equipped with single acting mechanical seal or double acting mechanical seal. INDAG mixers are designed likewise for explosive range and products (ATEX).

DLM/H

Rotational speed 1/=min
1,500 rpm to 6,000 rpm
Pressure levels
6 bar • 10 bar • 16 bar • 25 bar • 40 bar • 100 bar
Capacities
50 l/h to 120,000 l/h
Temperatures
0 °C to 300 °C
Viscosities
1 mPas to 500,000 mPas

DLM/H

Materials
1.4301 (AISI 304) • 1.4404 (AISI 316L) • 1.4539 (AISI 904L) • 1.4462 (AISI 318) • 1.0421 (AISI 106 - A)
Seals
Single acting mechanical seal • double acting mechanical seal • stuffing box seal
Connections
EN • DIN • ANSI flange
Positioning
Horizontal or vertical position of mixer is possible

Advantages of DLM/H

•  Very good self - cleaning during CIP - cleaning

•  Efficient introduction of mixing energy

•  Modular design of homogenizer

•  Hygienic design

DLM/H 2

Capacity* l/h
50 - 6,000
Connections DN
25 - 50
Connections optional ASME
1" - 2"
Power kW
2.2 - 4.0
Rotational speed 1/min
1,000 - 6,000
Mixing stages compact version
DLM/H - 202 KB
Mixing stages bearing block version
-----
* Capacity depends on product.

DLM/H 4

Capacity* l/h
2,000 - 55,000
Connections DN
80 - 100
Connections optional ASME
3” - 4”
Power kW
11 - 22
Rotational speed 1/min
1,000 - 3,600
Mixing stages compact version
DLM/H - 402 KB
Mixing stages bearing block version
DLM/H - 403 LB
* Capacity depends on product.

DLM/H 3

* Capacity depends on product.
Capacity* l/h
500 - 30,000
Connections DN
50 - 65
Connections optional ASME
2” - 2,5”
Power kW
4 - 11
Rotational speed 1/min
1,000 - 5,000
Mixing stages bearing block version
DLM/H - 303 LB
Mixing stages compact version
DLM/H - 302 KB

DLM/H 5

Capacity* l/h
5,000 - 120,000
Connections DN
100 - 125
Connections optional ASME
4” - 5”
Power kW
37.5 - 75
Rotational speed 1/min
1,000 - 3,600
Mixing stages compact version
DLM/H - 502 KB
Mixing stages bearing block version
DLM/H - 503 LB
* Capacity depends on product.
Oops, an error occurred! Code: 202410121657436644a230

Do you need further information?

Data Protection Declaration.

If you send us inquiries by means of our contact form, your personal data will be stored on the legal basis of Art. 6(1)f DSGVO (General Data Protection Regulation). Further accessories can be found in our Data Protection Declaration.